Request a quote
C&I
Commercial & Industrial
For your Commercial and Industrial needs, look to Dura-Line for quality, high-performing products. For behind the wall use, choose either RIser or Plenum Corrugated products. A permanent pathway will be in place for future upgrades or repairs. FuturePath, bundles of MicroDucts, can provide up to 25 pathways in one conduit.
Smoothwall HDPE is the most commonly used underground raceway and is packaged in continuous lengths on reels or coils allowing for fast installation with minimum joints. Smoothwall can be installed via trenching,...
Dura-Line FuturePathTM consists of multiple variations of MicroDuct in specific sizes all bound together with an oversheath for ease of placement. All of the MicroDuct have internal longitudinal ribbing (1) and a permanent...
Dura-Line Smooth Outside Wall HDPE Conduit with internal longitudinal ribs is made to Industry Standards for Power and Communications Applications. It can be installed using open trench methods, HDD (Horizontal Directional...
Ribbed In/Ribbed Out In HDPE is a high-performance conduit used for underground installations into main conduits. Ribbed In/Ribbed Out In HDPE provides for reduced surface contact between inside walls and the cable...
Dura-Line PinPointTM Locatable Conduit is made to Industry Standards for Power and Communications Applications. It can be installed using open trench methods, HDD (Horizontal Directional Drilled) Plowed, or pulled into...
Take a SILICORE lined HDPE Conduit, place a stainless steel corrugated tube that is hermetically sealed with a laser welded seam and you have a conduit that can stand up to extremely harsh and corrosive environments...
Duraline FuturePath Flex is an array of MicroDucts connected by an oversheath and a tangential partitioned web. Its flat configuration and ease of duct segregation make it ideal for MicroTrenching and FTTX applications.
Duct...
Duraline’ Armored FuturePath® is a configuration of MicroDucts not unlike the OSP HDPE version, but is designed for buried installations that are subject to ground movement, frost heave, or that may require protection from...
Duraline’ Aerial Self-Support Figure-8 FuturePath® is a configuration of MicroDucts not unlike the OSP HDPE version, but has an additional oversheath and ¼” Extra High Strength Steel flooded strand attached to the MicroDuct...
Duraline’ Aerial FuturePath® is a configuration of MicroDucts not unlike the OSP HDPE version. The oversheath has additional UV inhibitors to allow 25+ years direct sunlight exposure while lashed to a support strand. The...
Using MicroDucts from Duraline are a better way to utilize that empty space, both today and tomorrow. It allows you to expand your fiber network as you bring on new customers. It enables you to increase bandwidth as your...
Cable-in-Conduit Service Drops trade name ”CableCon” is a HDPE conduit system with the service drop pre-installed in the finished reel or coil, eliminating the need to place the service drop in the conduit.
Service Drops are...
Corrugated Flex is a highly flexible form of HDPE conduit used to protect fiber cables in manholes or as a temporary conduit. Corrugated Flex is available in coils. This product has a greatly reduced bend radius when...
Corrugated Standard is a more flexible form of HDPE conduit used to protect fiber cables in underground conduit systems. Corrugated Standard can be pulled into main conduit systems for short distances. Corrugated...
Cable-in-Conduit Medium Voltage trade name ”CableCon” is a HDPE conduit system with 15KV, 25KV or 35KV cables pre-installed in the finished continuous length reel, eliminating the need to pull in the Cables. Product is...
Cable-in-Conduit 600 Volt Copper trade name ”CableCon” is a HDPE conduit system with a wide variety of 600 Volt Copper cables pre-installed in the finished continuous length reel, eliminating the need to pull in the Cables....
Cable-in-Conduit 600 Volt Aluminum trade name ”Cable Con” is a HDPE conduit system with a wide variety of 600 Volt cables pre-installed in the finished continuous length reel, eliminating the need to pull in the Cables....
Cable-in-Conduit Coaxial trade name ”CableCon” is a HDPE conduit system with Coaxial Cable pre-installed in the finished continuous length reel, eliminating the need to pull in the Coaxial Cable. Normally Coaxial is...
Cable-in-Conduit Fiber trade name ”CableCon” is a HDPE conduit system with Fiber Optic Cable pre-installed in the finished continuous length reel, eliminating the need to pull in or jet in the fiber. Normally Fiber is...
The SuperJet® is designed for blowing or floating telecommunication cables (optical fiber, coax or multipair) in preinstalled ducts.
Item #
Description
P-ZC-FJ0011102AD
SUPERJET-P01
I-906689
Air hose, 30 ft...
The Air-Trak MD features a patented load-sensing system to provide the ultimate in safe installation of micro cables, MicroDucts, as well as conventional optical fiber cables. The MD unit installs 12/10 and 10/8 mm...
The MiniJet® is designed for blowing or floating telecommunication cables (optical fiber, coax or multipair) in preinstalled ducts.
Item #
Description
P-ZC-FJ0401102AD
MINIJET-H01
P-410004
Hydraulic power pack...
The MiniJet® is designed for blowing or floating telecommunication cables (optical fiber, coax or multipair) in preinstalled ducts.
Item #
Description
P-ZC-FJ0021101AD
MINIJET-P01...
FEATURES:
• Sturdy steel construction for maximum durability.
• Foot pedal control for ‘hands-free’ operation.
• Accepts an array of optional stainless steel capstans for various pulling requirements...
FEATURES:
• Available in cargo capacity ranges to meet your exact requirements
• Galvanized frame for superior corrosion protection and durability
• All models can handle up to a 120-inch diameter, 65-inch wide reel...
FEATURES:
• Versatile, economic transport trailer for cable placing systems
• Can be configured to handle either the Plummet or Arnco placing systems
• Durable galvanized tubular frame
• Optional large, locking...
